Washington Well Data › Kitsap County › Southworth (98386)
Southworth, WA (98386): well depth, water level & drilling cost
✓ 223 Ecology records · Kitsap County
Pull every recorded well near a Southworth (98386) address — $49
How deep are wells in and around Southworth (98386), Washington?
The median drilled well depth in and around Southworth (98386) is 109 ft, based on 222 wells with recorded depths in the state Ecology database. Half fall between 73 ft and 161 ft; 90% are shallower than 235 ft.
How much does it cost to drill a well in and around Southworth (98386)?
Applying published per-foot rates to the local median depth of 109 ft: drilling and casing alone typically runs $2,725–$7,085; a complete system including pump, pressure tank, and hookup typically runs $6,540–$10,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Southworth (98386)?
The median static water level is 167 ft below ground surface (middle half of wells: 106 ft–193 ft), from 6 measurements.
Iron staining, rotten-egg smell, hard water, or a failed test at closing — Salish Water Works, a new Puget Sound company, publishes its treatment systems and planned prices up front and specs the fix from your water test. No in-home sales visit. Installation opens Fall 2026; the waitlist is open now and waitlist members get first slot priority.
See planned systems & pricing → salishwaterworks.comDrilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kitsap County.
Part of Kitsap County well records.
Method: medians computed from Ecology records (water wells only — soil/environmental borings and decommissions excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.