Washington Well Data field records · 2026 survey

Washington Well Data › Whatcom County

Whatcom County, Washington: well depth, water level & drilling cost

✓ 4,994 Ecology records · verified 2026-07-28

72 ftmedian well depth
37 ft–165 fttypical depth range
19 ftmedian static water level
20 gpmmedian yield (1,081 tests)

How deep are wells in Whatcom County, Washington?

The median drilled well depth in Whatcom County is 72 ft, based on 4,945 wells with recorded depths in the state Ecology database. Half of all wells fall between 37 ft and 165 ft; 90% are shallower than 248 ft. Wells drilled since 2016 have a median depth of 57 ft.

How much does it cost to drill a well in Whatcom County?

Applying published per-foot rates to the local median depth of 57 ft: drilling and casing alone typically runs $1,425–$3,705; a complete system including pump, pressure tank, and hookup typically runs $3,420–$5,700. Actual quotes depend on site access, geology, and casing requirements.

Get quotes from drillers active in Whatcom County

Free for property owners. We route your request only to licensed drillers who actually file well logs in Whatcom County — never sold elsewhere.

What is the static water level in Whatcom County?

The median static water level is 19 ft below ground surface (middle half of wells: 9 ft–57 ft), from 1,075 measurements.

How much water do wells in Whatcom County produce?

The median tested yield is 20 gpm (middle half: 10 gpm–35 gpm), from 1,081 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Whatcom County address — $19

Bad well water in Whatcom County?

Iron staining, rotten-egg smell, hard water, or a failed test at closing — Salish Water Works, a new Puget Sound company, publishes its treatment systems and planned prices up front and specs the fix from your water test. No in-home sales visit. Installation opens Fall 2026; the waitlist is open now and waitlist members get first slot priority.

See planned systems & pricing → salishwaterworks.com

Drilled depth distribution

0–50 ft 1,925 50–100 ft 1,082 100–150 ft 542 150–200 ft 528 200–300 ft 580 300–400 ft 211 400–600 ft 61 600+ ft 16

Who drills wells in Whatcom County?

Licensed drillers by number of wells completed in this county since 2016, per filed well reports (license roster: Washington Department of Ecology).

DrillerWells since 2016
Richard Smith416
David Rutledge177
Michael Florence105
Brett Boulton99
Brannon Hopke48
Ryan Wilhonen48
Ralph Riggles32
Jerry Peterson23

See every driller with wells on record in Whatcom County, ranked →

Get quotes from local drillers

Looking at a specific property in Whatcom County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Whatcom County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from Ecology records (water wells only — soil/environmental borings and decommissions excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.